F065
Ububanzi obuqhelekileyo boMbhobho wangaphandle:
- Icetyiswe yi-Enterprise Standard ye-HL Cryogenic Equipment. Ingaveliswa ngokweemfuno zomthengi.
- Uxinzelelo loYilo:
- Inconyelwe ≤ 16 bar. Okanye ukhethe Uhlobo loQhagamshelo oluWelded (≤40 bar).
- Izinto zoMbhobho wangaphandle
Ngaphandle kwemfuneko ekhethekileyo, izinto zombhobho wangaphakathi nombhobho wangaphandle ziya kukhethwa ngokufanayo.
3.1.3 Uhlobo loQhagamshelo oluDityanisiweyo
i-odel
Uqhagamshelo
Uhlobo
Ububanzi obuqhelekileyo boMbhobho wangaphakathi
Uxinzelelo loYilo
Izinto eziphathekayo
yombhobho wangaphakathi
Umgangatho
Ingxelo
W010
00X
Uhlobo loQhagamshelo oluWelded lweHose eguquguqukayo yeVacuum eQinisekileyo eVimbayo
DN10, 3/8"
Ibha ye-8~40
Intsimbi Engagqwaliyo ye-300 Series
I-ASME B31.3
| V | I-DN20, 3/4" | DN25, 1" | Ububanzi obuqhelekileyo boMbhobho wangaphandle: | |
| Uxinzelelo loYilo | Izinto zoMbhobho wangaphakathi. | U-A ngu-304, | I-DN40, 1-1/2" | U-C ngu-316, |
| U-D yi-316L, | I-HLHS | I-HLHS | W015 | 00X |
| DN15, 1/2" | No | No | I-HLHS | Uxinzelelo loYilo |
| Nominal Diameter of Inner Pipe | 00X | I-HLHS | W025 | 00X |
| Design Pressure | I-HLHS | I-DN32, 1-1/4" | 00X | I-DN32, 1-1/4" |
| I-HLHS | I-HLHS | I-HLHS | I-DN40, 1-1/2" | I-HLHS |
| Kucetyiswa ukuba kubekho uhlobo lwe-≤ DN25 okanye i-1". Okanye ukhethe uhlobo lwe-Vacuum Bayonet Connection oluneFlanges kunye neeBolts (ukusuka kwi-DN10, 3/8" ukuya kwi-DN80, 3"), Uhlobo lwe-Welded Connection (ukusuka kwi-DN10, 3/8" ukuya kwi-DN150, 6") | 00X | |||
| DN50, 2" | I-HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Umgangatho | LN2I-HLHS2W080 | |||
00X
DN80, 3"
| I-LHSW100 | |
| 00X | |
| DN100, 4" |  |
I-LHSW125
| 00X | DN125, 5" | I-LHSW150 | 00X | DN150, 6" | Ububanzi obuqhelekileyo boMbhobho wangaphandle: |
| Icetyiswe yi-Enterprise Standard ye-HL Cryogenic Equipment. Ingaveliswa ngokweemfuno zomthengi. | Izinto zoMbhobho wangaphandle | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Uhlobo | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Umgangatho | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Uxinzelelo loYilo. | / | DN25, 1" | DN25, 1" | / | |
| Izinto zoMbhobho wangaphakathi. | / | DN25, 1" | DN25, 1" | / | |
| U-C ngu-316, | / | DN25, 1" | DN25, 1" | / | |
| I-HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| I-HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Ububanzi obuqhelekileyo boMbhobho wangaphakathi:
| Kucetyiswa ukuba kubekho uhlobo lwe-≤ DN25 okanye i-1". Okanye ukhethe uhlobo lwe-Vacuum Bayonet Connection oluneFlanges kunye neeBolts (ukusuka kwi-DN10, 3/8" ukuya kwi-DN80, 3"), Uhlobo lwe-Welded Connection (ukusuka kwi-DN10, 3/8" ukuya kwi-DN150, 6") | Ububanzi obuqhelekileyo boMbhobho wangaphandle: |
| Icetyiswe yi-Enterprise Standard ye-HL Cryogenic Equipment. Ingaveliswa ngokweemfuno zomthengi. | Uxinzelelo loYilo: |
| Inconyelwe ukuba ibe yibha eyi-≤ 16. Okanye ukhethe uhlobo loQhagamshelo oluDityanisiweyo (≤40 ibha) | Izinto zoMbhobho wangaphandleNgaphandle kwemfuneko ekhethekileyo, izinto zombhobho wangaphakathi nombhobho wangaphandle ziya kukhethwa ngokufanayo.3.2 Inkqubo yeMibhobho eVimbayo yeVacuum enamandla3/S |
| 3.2.1 Uhlobo loQhagamshelo lweVacuum Bayonet oluneClamps | i-odel |
| Uqhagamshelo | Uhlobo |
| Ububanzi obuqhelekileyo boMbhobho wangaphakathi | Uxinzelelo loYilo |
| Izinto eziphathekayo | yombhobho wangaphakathi |
| Umgangatho | Ingxelo |
HDB01008
Uhlobo loQhagamshelo lweVacuum Bayonet oluneClamps zeDynamic Vacuum Insulated Flexible Hose
lDN10, 3/8"
lIbha ezi-8
| Intsimbi Engagqwaliyo ye-300 Series U-C ngu-316, | Izinto zoMbhobho wangaphakathi. | |
| U-A ngu-304, | I-B yi-304L,U-C ngu-316,U-D yi-316L, | |
| U-E ngomnye. | I-HLH | DB01508 |
| DN15, 1/2" | Uxinzelelo loYilo: | Uxinzelelo loYilo: |
| I-DN20, 3/4" | Uxinzelelo loYilo: | Uxinzelelo loYilo: |
| DN25, 1" | Uxinzelelo loYilo: | Uxinzelelo loYilo: |
| Ububanzi obuqhelekileyo boMbhobho wangaphandle: | Uxinzelelo loYilo: | Uxinzelelo loYilo: |
Inconyelwe ukuba ibe yibha eyi-≤ 8. Okanye ukhethe uhlobo loQhagamshelo lweVacuum Bayonet oluneeFlanges kunye neeBolts (≤16 bar), Uhlobo loQhagamshelo oluWelded (≤40 bar)Izinto zoMbhobho wangaphandleNgaphandle kwemfuneko ekhethekileyo, izinto zombhobho wangaphakathi nombhobho wangaphandle ziya kukhethwa ngokufanayo.
Imeko yoMbane:
HL-HX-X-Indawo kufuneka inike umbane kwiimpompo zevacuum kwaye yazise i-HL Cryogenic Equipment ngolwazi lombane wasekuhlaleni (iVoltage kunye neHertz).-00-X
3.2.2 Uhlobo loQhagamshelo lwe-Vacuum Bayonet oluneFlanges kunye neeBolts
i-odel
Uqhagamshelo
Uhlobo
Ububanzi obuqhelekileyo boMbhobho wangaphakathi
Uxinzelelo loYilo
Izinto eziphathekayo
yombhobho wangaphakathi
Umgangatho
Ingxelo
Nominal Diameter of Inner Pipe
00X
Ibha ye-8~16
DN10, 3/8"
Ibha ye-8~16
Intsimbi Engagqwaliyo ye-300 Series
Design Pressure
Uxinzelelo loYilo.
I-08 yi-8bar,
I-16 yi-16bar.
Izinto zoMbhobho wangaphakathi.
U-A ngu-304,
I-B yi-304L,
U-C ngu-316,
U-D yi-316L,
U-E ngomnye.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Uthotho lweSahluli seSigaba seVacuum Insulated | DN10, 3/8" | Armenian
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| IsiFrentshiUbubanzi obuqhelekileyo boMbhobho wangaphandle:X | DN15, 1/2" | |||||
| IsiFrentshiInconyelwe ≤ 16 bar. Okanye ukhethe Uhlobo loQhagamshelo oluWelded (≤40 bar).X | DN20, 3/4" | |||||
| IsiFrentshiImeko yoMbane:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Iceland
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| IsiFrentshiI-08 yi-8bar,00X | kunye nama-25, ama-32, ama-40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| IsiFrentshiIsiSamoa00X | DN15, 1/2" | |||||
| IsiFrentshiSindhi00X | DN20, 3/4" | |||||
| IsiFrentshiIsiTajik00X | DN25, 1" | |||||
| IsiFrentshiIsiThai00X | DN32, 1-1/4" | |||||
| IsiFrentshiIsi-Uzbek00X | DN40, 1-1/2" | |||||
| IsiFrentshiisiXhosa00X | DN50, 2" | |||||
| IsiFrentshiIsiZulu00X | DN65, 2-1/2" | |||||
| IsiFrentshiOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Imeko yoMbane:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Intsimbi Engagqwaliyo ye-300 Series | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| IsiFrentshiDN15, 1/2"00X | DN15, 1/2" | |||||
| IsiFrentshiI-DN20, 3/4"00X | DN20, 3/4" | |||||
| IsiFrentshiDN25, 1"00X | DN25, 1" | |||||
| IsiFrentshiW03200X | DN32, 1-1/4" | |||||
| IsiFrentshiW04000X | DN40, 1-1/2" | |||||
| IsiFrentshiW05000X | DN50, 2" | |||||
| IsiFrentshiW06500X | DN65, 2-1/2" | |||||
| IsiFrentshiW08000X | DN80, 3" | |||||
| HUmbhobho weJacket yeVacuum00X | DN100, 4" | |||||
| HIvalvu yokulawula ukuhamba kweoksijini yolwelo lwaseTshayina00X | DN125, 5" | |||||
| HIxabiso Elithengiswayo eTshayina eTshayina e-ISO esemgangathweni e-2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSInkqubo yePompo yeDynamic Vacuum00X | Uthotho lweSahluli seSigaba seVacuum Insulated | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| IsiFrentshiI-Whatsapp00X | DN15, 1/2" | |||||
| IsiFrentshiI-WeChat00X | DN20, 3/4" | |||||
| IsiFrentshiIsiJamani00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: IsiGrike
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Danish
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLisiLawoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenian
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonianX | DN15, 1/2" | |||||
| HLHIsiFrisianX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Iceland
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | isiMawori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDIsiSamoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDIsiTajik00X | DN25, 1" | |||||
| HLHDIsiThai00X | DN32, 1-1/4" | |||||
| HLHDIsi-Uzbek00X | DN40, 1-1/2" | |||||
| HLHDisiXhosa00X | DN50, 2" | |||||
| HLHDIsiZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
